Accepting/ending/rejecting a call
NOTE
►
If you are listening to music and receive a call, you will hear the ringtone in
the headphones and playback is stopped. After finishing the call, playback
will be resumed automatically.
►
You can accept/reject calls via the headphones or your smartphone. The
sound is automatically played back through the headphones.
Press 1 x briefly (for incoming call)
Press 1x briefly (during call)
Press and hold for approx. 2 seconds (for incoming calls)
Music playback via AUX IN
You can use the supplied audio cable
non-Bluetooth
®
phones behave like normal, cable-connected headphones and can even be
used with an empty battery. The Bluetooth
buttons on the headphones do not function.
♦
Make sure that the headphones are switched off.
♦
Connect the audio cable
phones.
♦
Connect the audio cable
on the playback device.
♦
Switch on the playback device and set the volume to minimum.
♦
Put on the headphones as described in the section Wearing the head-
phones.
♦
Set the desired volume on the playback device.
SKHK 40 C1
Button
-compatible playback devices. In AUX IN mode, the head-
e
e
5
e
to connect the headphones to
function is deactivated and the
®
to the AUX IN socket
to the audio output (e.g. headphone jack)
Function
Accept call
End call
Reject call
8
of the head-
GB │ IE
│
13
■