Transmit Power Control; Antenna Statement - Avaya WLAN 8100 Información Reglamentaria

Regulatory Compliance Statements
Transmission Time and Channel Move Time). This product qualifies for this category since the
maximum achievable transmit power is greater than 23 dBm per the requirements of Table D.
2 in Annex D of the standard.
IEEE 802.11a operation in the 5250 to 5350 MHz and 5470 to 5725 MHz frequency bands is
governed by ETSI EN 301-893 v1.5.1 and the R&TTE Directive 1999/5/EC. Effective July 1,
2008, EN 301-893 v1.5.1 was updated to require compliance with 0.8 μsecond pulse widths
and staggered PRF's in the 5470 – 5725 MHz band. The AP 8120 access point meets
compliance with these new mandates by disabling operation, via software, on channels 120,
124, 128 and 132 in the 5600 to 5650 MHz frequency band because it cannot meet the 0.8
μsecond pulse width and staggered PRF DFS requirements as outlined in the updated EN
301-893 v1.5.1 standard.

Transmit Power Control

European Regulatory requirements specify that wireless devices must employ Transmit Power
Control (TPC) to reduce the potential for interference to other communication systems
operating in the 5 GHz frequency bands. This device includes a provision for adjustment of
Transmit Power in accordance with the limits in EN 301-893 v1.5.1, Sections 4.4.2.1 and
4.4.2.2.

Antenna Statement

Intentional radiators, such as the Avaya WLAN 8100 AP 8120 access points, are not intended
to be operated with any antenna(s) other than those furnished by Avaya. An intentional radiator
may only be operated with the antenna(s) with which it is authorized.
Use of an antenna not specifically authorized by Avaya may not comply with local regulatory
requirements with respect to radiated emission limits and may result in illegal operation of the
product. The installer of the wireless system and associated antenna is required to ensure that
only those antennas specifically approved by Avaya are deployed with the intentional radiator.
Be sure to associate the appropriate antenna model number and localized regulatory region
when selecting the Avaya authorized antenna(s).
12 Avaya WLAN 8100 Regulatory Information - AP 8120 December 20, 2010