Installing An Access Point With A Ceiling Grid Adaptor - Avaya WLAN 8100 Información Reglamentaria

6. Allow the access point to slide down the keyhole slots, making sure the access point
7. Secure the access point to the wall mounting bracket and tighten the thumbscrews.
8. Verify that the access point is secured to both the bracket and to the wall.

Installing an Access Point with a ceiling grid adaptor

The ceiling grid adaptor comes with two interlocking bracket parts. The larger bracket includes
keyhole shaped slots which mate with tabs on the under surface of the AP and a threaded hole
that mates with the captive thumbscrew on the AP. The smaller bracket also includes a captive
fastener and it can be oriented with respect to the larger bracket in two different ways
corresponding to narrow or wide ceiling grids.
Perform the following procedure to install the access point with a ceiling grid adaptor:
Avaya WLAN 8100 Regulatory Information - AP 8120
mounting tabs are seated at the bottom of the slot.
Installing an Access Point with a ceiling grid adaptor
December 20, 2010 15