Avaya WLAN 8100 Información Reglamentaria página 14

English
2. Install the screws into the wall anchors but do not seat them fully, leave at least a
3. Slip the wall bracket over the heads of the screws and slide the bracket to the right as
4. Tighten the screws to secure the wall mounting bracket tightly against the wall.
5. Align the mounting tabs on the bottom of the access point sheet metal enclosure
14 Avaya WLAN 8100 Regulatory Information - AP 8120
The wall bracket is designed to use a minimum of 2 anchors and a maximum of 4.
2mm gap between the screw head and the wall.
viewed facing the wall.
with the vertically oriented keyhole slots in the mounting bracket.
December 20, 2010