Domair SKJ-CR015C Instrucciones De Uso página 27

key Function
Press this button to turn the fan on
or set it to standby.
Press this button to activate the
timer. Each press of the button
represents
(maximum 8 hours). the unit
will automatically stop when the
selected time has elapsed.
Press
the
in this mode, fan speed "1" is
automatically selected.
Press this button to select the
highest speed (this speed is
greater than 9).
Press this button to turn the fan
horizontally. Press again to stop
the turn.
imPoRtaNt :
when the unit is idle, its power is not completely off. when the unit is no longer used,
it is recommended to disconnect it from the wall outlet.
Rev 0-12 11 19
1 additional
this button to
"night" operating
Fabriqué en Chine
display
On power up the number 3 is
displayed on the screen to indicate
that the device is in speed 3.
0 is displayed on the screen when
the fan is in standby.
At the first press, the number 1
and a flashing dot appear on the
hour screen.
with each new press the time
displayed
increased by one hour.
to deactivate the timer, press
the «Standby» button to stop the
device, or press the «Timer» key
repeatedly until the display shows
0. After about one second, the
selected speed is displayed again.
select The letter «L» is displayed on the
mode. led screen.
The letter «H» is displayed on the
led screen.
on the screen
Page 27
is