Operation - Domair SKJ-CR015C Instrucciones De Uso

oPERatioN

Place the fan on a flat, stable surface.
ensure that the air inlets and outlets
are not obstructed. No object should be
placed less than 30 cm from the front of
the fan. Curtains and other kinds of net-
ting and screens must be located more
than 30 cm away from the appliance.
start-up, oscillation and shutdown can
be done from the fan or from the remote
control. other commands are acces-
sible by remote control only.
with each command (fan or remote
control), a beep sounds.
insert the power plug into a wall outlet.
A beep is heard and a turning point on
the led display indicates that the unit is
in standby.
Rev 0-12 11 19
Fan controls:
and the number 3 is present on the LED
screen. Press the led screen again
successively to vary the speed cyclically
between 1 and 9.
To put the device in standby, press
and hold the LED screen for about 2
seconds: a beep sounds; release the
screen; the fan stops.
the oscillation starts.
to stop the oscillation, press the led
screen again for about 1 second: a beep
sounds; release the screen; the oscilla-
tion stops.
Remote control:
Fabriqué en Chine
press the led screen to turn on
the fan. the fan starts at speed 3
to start the oscillation, press the
LED screen for about 1 second:
Page 26