Amibot Spirit MOTION Manual Del Usuario página 24

EN
Operating the appliance
HOME mode
If you wish to charge the robot at any time while it is cleaning,
you can do so by pressing the "Home Base" button on the remote
control. The robot will automatically go back to the home base after
searching (search time depends on the distance between the home
base and if there are any objects along its route).
Virtual wall
Place the virtual wall at the edge of the two areas you want to
separate. Ensure that the infrared beam is pointing towards a clear
area of the room with the "FORBIDDEN AREA" red indication towards
the area that the robot should not pass. The blue "WORKING AREA"
indication should therefore be on the side of the room that you
want to clean.
Switch on the virtual wall (ON) via the power button. The
robot stays within the virtual wall's boundaries while
it is cleaning (no matter the cleaning mode selected).
22