Amibot Spirit MOTION Manual Del Usuario página 36

EN
Troubleshooting
"Please check
05 and clean turbo
brush"
"Please check and
06
clean turbo fan"
"Please clap front
07
bumper"
"Please clean
08
drop sensors"
"Please check
09
nose wheel"
"Please put robot
10
back to ground"
"Please put robot
11 back to charging
dock to recharge"
Problem with the central
brush. It may be blocked.
Problem with the fan or
motor.
The front bumper is
blocked.
The gap sensors are
dirty.
Problem with the castor.
The robot is no longer in
contact with the ground.
The robot does not have
enough battery and it
cannot find its home
base.
34
Check the central brush
and its housing and
remove any elements likely
to be blocking them.
Switch the robot off and let
it cool down. Turn it back
on. If the problem persists,
please contact the AMIBOT
after-sales service.
Check the front bumper
and gently tap it to loosen
it.
Clean the gap sensors
using a soft cloth.
Check the castor and
remove any elements likely
to be blocking it.
Place the robot on a flat
surface and restart a
cleaning cycle.
Manually place the robot
on its home base. Check
that the robot's power
sensors are in contact with
the home bases contacts.