Starting The Appliance; Scheduling - Amibot Spirit MOTION Manual Del Usuario

EN
Operating the appliance

Starting the appliance

After attaching the cyclonic dustbin or vibrating water tank, switch
the robot on. Wait a few seconds to let it start up, then press the
AUTO button on the robot or on the remote control. The robot starts
its cleaning cycle in AUTO mode.
After attaching the cyclonic dustbin or vibrating water tank, switch
the robot on. Wait a few seconds to let it start up, then press the
AUTO button on the robot or on the remote control. The robot starts
its cleaning cycle in AUTO mode.
NOTES :
• If the robot is in standby mode, press the AUTO button on the robot or the
remote control once to come out of standby.
• The robot's cycle can be interrupted and it can be manually controlled using
the remote control.

Scheduling

With the daily schedule feature, the robot can start a cleaning cycle
at the time you choose every day of the week. You can reset the time
and scheduled times whenever you want via the remote control.
NOTE : All settings are lost when the robot is switched off via the ON/OFF button.
Reset the time and scheduled cleaning time as above.
16