Transportation And Storage; To Prepare Your Product For Long-Term Storage; Technical Data - Husqvarna T525 Manual De Usuario

Transportation and storage

• For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
• Always use approved containers for storage and
transportation of fuel.
• Empty the fuel and chain oil tanks before
transportation or before long-term storage. Discard
the fuel and chain oil at an applicable disposal
location.
• Use the transportation guard on the product to
prevent injuries or damage to the product. A saw
chain that does not move can also cause serious
injuries.
• Remove the spark plug cap from the spark plug and
engage the chain brake.

Technical data

Engine
Cylinder displacement, cm
Idle speed, rpm
Maximum engine power acc. to ISO 8893, kW/hp @ rpm
1
Ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Fuel tank capacity, liter/cm
Oil tank capacity, liter/cm
Type of oil pump
Weight
Weight, kg
Noise emissions
Sound power level, measured dB(A)
Sound power level, guaranteed L
1
Always use the recommended spark plug type. Use of the incorrect spark plug can cause damage to the pis-
ton/cylinder.
28
Transportation and storage
Technical data
3
3
3
dB(A)
WA
• Attach the product safely during transportation.
To prepare your product for long-term
storage
1. Disassemble and clean the saw chain and the
groove in the guide bar.
CAUTION: If the saw chain and guide
bar are not cleaned, they can become
rigid or blocked.
2. Attach the transportation guard.
3. Clean the product. Refer to
for instructions.
4. Do a complete servicing of the product.
Husqvarna T525
27.0
2900
1.1/1.5@9500
NGK CMR6A
0.75
0.19/190
0.17/170
Adjustable
2.7
110
111
Maintenance on page 17
732 - 016 -