Tabla de contenido
Publicidad
Alineamiento del aserradero
7
Procedimiento de alineamiento completo
esté encima del riel de pivote delantero.
To adjust the bottom rollers (Sawmills prior to Rev. D6.00 only):
2. Check the lower roller on the bottom track rail. Make sure that the bottom rollers touch the
bottom rail but remain loose enough that you can turn them with your finger. Use the ver-
tical bolts to adjust the bottom track rollers.
See Figure 7-24. Tighten the vertical adjustment bolt to move the bottom rollers toward
the track rail. Loosen the bolt to move the bottom rollers away from the track rail. Proceed
to Paso 4.
7-29
Upper Rollers (4)
Stop Bolt (2)
Horizontal
Vertical
Adjustment
Adjustment Bolt
Nuts
2597doc121307
SM0135B
Stop Screw (2)
Inside Lower
Rollers (2)
Bottom Lower
Rollers (2)
Alineamiento del aserradero
FIG. 7-24
Publicidad
Tabla de contenido
