Klarstein 10032762 Manual Del Usuario página 15

1 Start
2 Stand by
3 Lack of water
4 2 CUP / 4 CUP
5 HOT WATER
6 KEEP WARM
Connect the power, turn on the power button back of
machine. Machine enters Stand by mode.
Under Stand by mode, 2CUP, 4CUP, HOT WATER /
KEEP WARM indicator always light on.
Under Stand by mode or there is no water or lack of
water when machine is working, The water indicator
will be flashing and other function can't work until
pour enough water into water tank and indictor will
light off, then machine can go back Stand by mode
or work again.
Under Stand by mode, put 20 g or 40 g coffee
powder into the filter. Then put the filter onto carafe,
and put the carafe in specified location. Press 2 CUP
or 4 CUP button. 2 CUP, 4 CUP, KEEP WARM and
BREWING indicator will light on, other indictor light
off. Then machine starts to work. READY indicator
will be flashing 10s before finished, after that always
light on, coffee will brew into carafe, and machine
will automatic keep warm for 28 mins, then go
back Stand by mode. Note: You can press HOT
WATER / KEEP WARM button over 3s to cancel
this function.
Under Stand by mode, put the carafe in specified
location, then press HOT WATER / KEEP WARM
button for just 1s, then indicator will light on and
other function indicator light off. Machine start to
work and water will brew into carafe. Machine will
go back Stand by mode after finished.
Under Stand by mode, put the carafe in specified
location, then press HOT WATER / KEEP WARM
button over 3s, function indicator will light off and
KEEP WARM indicator light on, machine will keep
warm for 28 mins. KEEP WARM indicator will light
off after finished, then machine go back Stand by
mode.
EN
15