Venturi Saliva Ejector; High Power Saliva Ejector Vórtice (Optional); Vacuum Pump Adaptor (Optional); Prophylaxis System - Olsen Quality Serie Guía De Operación

- Venturi Saliva Ejector

To activate the suction: remove the ejector (2) from the holder (1).
To deactivate the suction: place the ejector in its holder (1).
The cannula adapter (3) is removable for cleaning.
- High Power Saliva Ejector Vórtice (Optional)
Before starting the operation with the Vórtice saliva
ejector (2), insert the cannula into the adapter (3).
To enable/disable suction: use the On/Off Vórtice saliva
ejector button (1) on the chair base.
The cannula adapter (3) is removable for cleaning.

- Vacuum Pump Adaptor (Optional)

To activate suction: remove the vacuum pump suction (2) from its
holder (1).
To adjust suction flow: to decrease the suction flow, turn the
adaptor's body (3) away from the indicators (4). The more distant, the
smaller the suction. For the maximum suction flow, align the indicators (4).
To deactivate the suction: place the vacuum pump in its holder (1).
The cannula adapter (5) is removable for cleaning.

Prophylaxis System

6.10.1 - Bicarbonate Jet (Optional)

Before starting use of the bicarbonate jet,
its necessary deposit bicarbonate sodium in the
reservoir (4), check for moisture in the filter (8) and
connect the bicarbonate jet handpiece (3) to its
coupling (2).
To fill the bicarbonate reservoir: open the reservoir (4) by
turning the cover (6) anticlockwise and deposit the bicarbonate
sodium until to the red line (5). Close the reservoir.
To remove condensed water in the filter: press the valve (7)
on the base of the filter (8) to drain the water.
To activate/deactivate the bicarbonate jet: press the
progressive/activation pedal (1). The more pressure on the pedal,
the greater the volume of the jet emitted by the handpiece. until
reaching the pressure limits of the equipment.
To adjust the spray: see section 6.1.
Clean the sodium bicarbonate tank (4) at the end of each procedure.

6.10.2 - Prophy-Jet System (Optional)

Before starting the Prophy-Jet system (3) use, deposit up
to 15g of sodium bicarbonate for dental use in the sodium
bicarbonate reservoir (4) and attach the Prophy-Jet to the
pneumatic coupling available on the assistant module or
pneumatic coupling (2) for low-speed handpiece in the working
table.
To activate/deactivate: press the progressive/activation
pedal (1). The higher the pressure applied to the pedal, the
higher the air volume of the jet emitted by the Prophy-Jet system,
until reaching the pressure limits of the equipment.
Clean the sodium bicarbonate tank (4) at the end of each procedure.
17