Festool BP 18 Li ASI Manual Del Usuario página 32


Should you have used the cordless pow-
er tool already, ensure that the battery
pack's capacity indicator has gone out
so that you can connect it (in certain
cases this can take a few seconds).

Press the connection button on the mo-
bile dust extractor or on the remote
control once. <PosNumber/>
The LED on the retrofit receiver
module slowly flashes blue and the
mobile dust extractor is ready for
connection for 60 seconds.

Switch on the cordless power tool.
The mobile dust extractor starts up
and the battery pack is connected
until the mobile dust extractor is
manually switched off.
Instructions for Li-ion battery packs

If a second battery pack is connected
to the mobile dust extractor, the con-
nection to the first battery pack is
lost.
Switching the mobile dust extractor on
and off
Once you have connected the battery pack
with the mobile dust extractor, the mobile
dust extractor will start up automatically
when the cordless power tool is in use.

After the mobile dust extractor has
been switched off via the battery
pack, it will continue to run for up to
fifteen seconds.

Press the on/off switch of the cordless
power tool to switch on the mobile dust
extractor.
GB
31