Kohler K-T15201 Guia De Instalacion página 4

Valve
Apply
plumbers putty.
Escutcheon
2. Install Lever Handles
Measure the distance from the top of the valve stem to the
finished surface.
Use the brass spline adapter and screw when the valve stem
height is between 1-3/16" (3 cm) and 2-1/8" (5.4 cm).
Use the plastic spline adapter when the valve stem height is
between 2-1/8" (5.4 cm) and 2-5/16" (5.9 cm).
If the brass spline adapter is required, attach it using the supplied
screw. The plastic spline adapter does not require a screw.
Close the valves (hot = counterclockwise, cold = clockwise).
Align the handles with each handle lever pointing away from the
spout horizontally.
If the handles are not properly aligned, lift a handle off the spline
adapter and move it one or two ridges until it is properly
aligned.
Attach the handle by tightening the handle bonnet onto the valve
body.
1010464-2-B
Valve Body
Plumbers Putty
Escutcheon
Valve
Stem
Spline
Adapter
Handle Bonnet
Lever Handle
4
Screw
Kohler Co.