Using Your Remote Control - Kohler 1013822-D Guía De Propietario

Heater
On/Off
Power
On/Off
Remote Control
The remote control places the whirlpool functions at your fingertips to
further enhance your bathing experience. Two types of remote controls
are available, based on your model whirlpool. Refer to the information
which applies to your model.
The waterproof remote control is designed to be used in the bath and
will float in the water.
Two AAA batteries are used in the remote control. To replace, simply
unscrew the endcap and insert the batteries, as shown above. Tighten
the endcap securely, making sure the endcap makes contact with the
seal.

Using Your Remote Control

Power On/Off - The whirlpool pump turns on and off using the
power button.
Heater On/Off - The heater automatically engages when the
whirlpool is turned on. To turn the heater off, press the heater
button. The indicator ring will appear light green when the heater
is off. Press the heater button again to turn the heater back on.
The indicator ring will appear dark green when the heater is on.
The heater will help to maintain the water temperature up to
104°F (40°C).
Effervescence Mode - Press the effervescence icon to activate the
effervescence ports to provide a gentle, soothing, bubbling action.
Kohler Co.
Heater
On/Off
Chromatherapy
Specific Color
Selection
3
Power
On/Off
Effervescence
Mode
Chromatherapy
Cycle
1023581-5-C