Qwest 2.4GHz Multi-Handset Cordless Phone System Manual Del Usuario página 13

2.4GHz Multi-Handset Cordless Phone System
Internal Calls (Intercom Calls)
You may talk with another person using the handset or base without engaging the
external phone line.
Handset
1. Press Int on the handset.
2. When you hear the internal dial tone (a pattern of three short beeps followed
by a pause), dial the number of the handset you want to call (a number from
1-4), or dial 0 to call the base.
3. Press the * key or the
ring, but only one can take the call.
4. The party being called presses either Talk on the handset or "Intcm" on the
base to answer.
5. When finished, press End once or return handset to base (or charger) to
disconnect the call.
Speakerphone
1. Press Intcm on the base.
2. When you hear the internal dial tone (a pattern of three short beeps followed
by a pause), dial the number of the handset you want to call (a number from
1-4), or press * to ring all handsets (although only one can answer.)
3. The party being called presses either Talk on the handset or Intcm on the
base to answer.
4. When finished, press Intcm on base or End on handset.
Redial
You may redial any of the last five external numbers dialed from a handset or the last
number dialed from the speakerphone.
Handset
1. Press the REDIAL
2. Use the [5] and [6] keys to view the redialable
numbers and the Talk key to dial the displayed
number.
Note: Redialable numbers are unique to each handset.
ALL INT soft key to page all handsets. All phones will
soft key.
Page 13