Qwest 2.4GHz Multi-Handset Cordless Phone System Manual Del Usuario página 16

2.4GHz Multi-Handset Cordless Phone System
Transfer
Transferring a call involves moving an external call from one handset to another.
Internal (intercom) calls may not be transferred. There are two types of transfer:
announced and unannounced.
Announced Transfer
1. Place an outside call on hold.
2. Place an intercom call to another handset (a number from 1-4), or dial 0 to call
the base.
3. Announce the call to the person who answers.
4. Hang up.
5. The person who receives the call presses Talk or Spkr to accept the call.
Unannounced Transfer
1. During an external call, press Int on the handset or Intcm on the base.
2. Place an intercom call to another handset (a number from 1-4), or dial 0 to call
the base.
3. The call will ring on the handset you dialed. Other handsets (or speakerphone)
will show a solid line to indicate the phone is in use.
4. If the transferred call is not picked up after 30 seconds, the call returns to the
original recipient.
Note: You may also initiate unannounced transfer by pressing Int* and any ringing
handset or the base speakerphone may pickup.
Call Waiting (Flash)
The Flash key is used with the Call Waiting feature. Press Flash to switch between
calls when the Call Waiting signal is heard.
Note: The Call Waiting signal requires subscription to the Call Waiting feature from
Qwest or your local telephone company.
Mute
Mute allows you to temporarily disconnect the base speakerphone so you may hear
the caller, but the caller is prevented from hearing you.
1. Press Mute on base speakerphone. The light illuminates.
2. To return to your conversation, press Mute again.
Page 16