Publicidad
Idiomas disponibles
Idiomas disponibles
English
Call differentiation
You can distinguish between door
calls, storey calls and internal calls
by their different call tones.
Accepting door calls
Pick up the receiver, speak, release
the door, replace the receiver.
Door calls can be accepted within
30 seconds of the last audible call
tone.
Triggering the door release
If you press the door release
button, this triggers the door
release on the door station which
initiated the last door call.
Light switching
If you press the light button,
lighting connected to the system
is switched on.
Adjusting the ringtone
volume
Use the rotary controller to change
the call tone volume for the device.
This can be adjusted from 0% to
100%. The microphone sensitivity
and the receiver volume cannot be
changed.
Switching and control functions
Switching and control function
with receiver down, internal call
with receiver picked up. Control
functions and internal call are only
possible with additional installa-
tion.
Internal calls/
internal conversations
Pick up the receiver and press the
button to call an internal user.
Additional installation required.
Button labelling
Use the lettering fields for button
labelling.
LED displays
LEDs for the status display or
feedback (yellow). The LEDs of but-
tons 3 and 4 can only be used by
expanding the wiring/installation.
Servicing
Statutory warranty conditions
apply. If the device requires ser-
vicing, contact your specialist
dealer or electrical installer.
Care instructions
Only ever clean your indoor device
using a soft cloth dampened with
mild soap solution. Dry, aggres-
sive cleaning agents and abrasive
detergents can damage the sur-
face. Detailed care instructions are
located in the download area of
www.siedle.com.
3
Publicidad
