Oki OKIPAGE 6w Manual Del Usario página 15

Material Safety Data Sheet (continued)
Hazardous Ingredients
Styrene-Butyl Acrylate Copolymer (91% by weight)
CAS# 25767-47-9
3
OSHA TWA 15 mg/m for total dust
3
ACGIH TLV 10 mg/m for total dust
Carbon Black (5-7% by weight)
CAS# 1333-86-4
3
OSHA TWA 3.5 mg/m
ACGIH TLV 3.5 mg/m 3
Polypropylene (less than 3% by weight)
CAS# 9003-07-0
3
OSHA TWA 15 mg/m for total dust
3
ACGIH TLV 10 mg/m for total dust
Amorphous Fumed Silica (less than 1% by weight)
CAS# 67762-90-7
3
OSHA PEL 15.0 mg/m
ACGIH TLV 10.0 mg/m
for total dust
3
for total dust
Note This product is not regulated under Section 313 of
SARA, Title III.
Physical Data
Melting Point: 110°C (230°F)
Boiling Point: Not applicable
Vapor Pressure: Not applicable
Vapor Density (Air=1): Not applicable
Evaporation Rate (Butyl Acetate=1): Not applicable
Specific Gravity (H O=1): 1.15
2
Solubility in water: Negligible
Appearance and odor: Black granules, no odor
E-15