Motor Enable - Askoll NGS1 Manual Del Usuario

USE

Motor enable

The engine must be enabled to start.
To enable the engine, insert the key into the switch
and turn it to , then press for 3 seconds to enable
the engine, motion warning light will turn on.
To disable the engine, press the engine enabling
button again for 3 seconds and turn the key in the
ignition switch to the left on
The engine will be disabled also by rotating the key
to .
24
NGS_Rev00_EN.indb 24 NGS_Rev00_EN.indb 24
NGS
1
.
- NGS NGS
2 3
09/07/2020 17:08:36 09/07/2020 17:08:36