Cleaning The Vehicle - Askoll NGS1 Manual Del Usuario

CLEANING THE VEHICLE

To avoid oxidation, wash the scooter every time it is used in extreme weather conditions or roads sprinkled with salt
or de-icing products, conditions of air pollution such as cities, industrial zones, areas of high salinity or moisture in
the atmosphere such as maritime areas.
Keep the frame clean from long-accumulated dirt, residues of industrial dust, dead insects, bird droppings, etc.
Use a low pressure water jet to soften dirt accumulated on the paintwork, then remove it with a soft sponge soaked
with abundant water and shampoo, rinse and dry with a suede.
Avoid washing the scooter under direct sunlight, especially in summer, to prevent it from drying and warming the
shampoo immediately before rinsing since this may damage the paint.
Do not use high pressure water jets to washing, so as to prevent damaging delicate
components of the vehicle.
When washing do not direct the water jet directly on delicate components such as
electrical wiring or their connections.
Never use rags soaked in gasoline, alcohol or potentially corrosive liquids to wash
painted surfaces, plastic or the seat to avoid loss of gloss and mechanical properties
of the materials, or even damaging them.
The scooter must be washed in areas equipped for collecting and purifying the
liquid used.
NGS_Rev00_EN.indb 59 NGS_Rev00_EN.indb 59
ADJUSTMENTS AND PERIODIC MAINTENANCE
EN
EN
EN
EN
EN
59
09/07/2020 17:09:24 09/07/2020 17:09:24