GreenWorks GC40L00 Manual Del Propietário página 15

OPERATinG YOUR WHEELBARROW
W a R N I N G
When moving in reverse, be ready for the wheelbarrow to lurch towards you and get immediately
up to speed. Be careful; step back and be prepared to walk backwards. Consider standing to the
side of the wheelbarrow until you get used to moving backwards.
STOPPING (See Figure 7)
1. Release the throttle.
2. Press the power switch to the off position. Remove the battery and store in a safe place to
prohibit unauthorized use of the Wheelbarrow.
NOTE: The self-propelled wheelbarrow does not have a braking system. Instead, to stop your wheelbarrow,
you simply release the throttle. Because of its momentum, your wheelbarrow might continue to move a bit
after you release the throttle. Don't let go of the handle until your wheelbarrow stops completely. Park your
wheelbarrow in a level area so it doesn't roll away.
Throttle
FIG. 7
UNLOadING YOUR WHEELBaRROW (See Figure 8)
1. Stop the wheelbarrow.
2. Squeeze the release lever on the bucket to release the bucket.
3. Grasp the handles on the bucket to raise and unload the bucket.
Release lever
FIG. 8
15