GreenWorks GC40L00 Manual Del Propietário página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SAfETY infORMATiOn
and high or locked-up place - out of reach of children.
• Check Damaged Parts - Before further use of the appliance, a guard or other part that is
damaged should be carefully checked to determine that it will operate properly and perform
its intended function. Check for alignment of moving parts, binding of moving parts, breakage
of parts, mounting, and any other condition that may affect its operation. A guard or other
part that is damaged should be properly repaired or replaced by an authorized service center
unless indicated elsewhere in this manual.
W a R N I N G
never stand in the bucket to activate the Wheelbarrow.
MOVING ON SLOPES
W a R N I N G
Slopes are a major factor related to slip-and-fall accidents, which can result in severe injury. All
slopes require caution. if you feel uneasy on a slope, do not drive on it.
• Use caution on slopes. Whenever possible, move up and down the slope at an angle.
• Exercise caution when changing directions on slopes.
• Remove obstacles such as rocks, tree limbs, or any other potential object that your
Wheelbarrow could hit.
• Watch for holes, ruts, or bumps. Be careful on uneven terrain to avoid overturning your
Wheelbarrow. Tall grass can hide obstacles.
• When moving down slopes, always keep your Wheelbarrow in low gear and moving. The
friction of the motor helps you keep better control of your Wheelbarrow.
• Use caution when carrying heavy loads up slopes. if your Wheelbarrow is overloaded, the
safety fuse may trip and allow the Wheelbarrow to rollback toward you, which may cause
severe injury.
• Do not turn on slopes unless necessary, and then, turn slowly and gradually.
• Do not move near drop-offs, ditches, or embankments. The Wheelbarrow could suddenly
turnover if a wheel is over the edge of a cliff or ditch or if an edge caves in.
• Do not park your Wheelbarrow on hills or steep slopes.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido