Set Up A Windows Pc To Allow The Radio To Access Your Audio Files Via A Upnp Server - Sangean WFR-20 Manual Del Usuario

9. Once the radio has .nished scanning, it will display 'By Album',
'By Artist', etc. Use the Select control to scroll through the scanned
media files, which will now be organised 'By Album', 'By Artist' and
'Playlists'
– if available.
Note that the first time the file scan is performed, a file called
'.reciva_ media_cache' is written to the folder where the audio files are
stored. This file is created by the scanning software in order to speed up
subsequent file scans.
Set up a Windows PC to allow the radio to access
your audio files via a UPnP server
1. If your PC is running Microsoft Windows XP or Windows Vista then
you can use Microsoft's Windows Media Player 11 (WMP 11) to act
as your UPnP (Universal Plug and Play) media server. If not already
installed on your PC, Windows Media Player 11 may be downloaded
from Microsoft's website and installed by following the instructions
detailed in its installation wizard, or by using Microsoft's Windows
Update facility.
2. Once installed, WMP 11 can create a library from all the media files
available to it on your PC. To add new media files to the library,
select 'File > Add to Library... > Advanced Options', click 'Add' and
choose the files you wish to add and click 'OK'.
You will now need to connect your Internet radio to Windows Media
Player 11 and configure it to allow the radio to access your media
library. In order to this, you will need to follow these next steps.
29
32
20070929_WFR-20_381R101-A_GB.p65
2007/10/1, ¤U¤È 05:13