Sleep Timer - Sangean WFR-20 Manual Del Usuario

Sleep timer

Your radio can be set to turn off after a preset time has elapsed.
The sleep setting can be adjusted between 15 and 120 minutes in
15 minute increments.
1. When the radio is playing, press the Select control to access
the menus. If needed, use the Back option to access the main
Mode menu.
2. Rotate the Select control until the 'Alarm clock' is highlighted on
the display then press the Select control.
3. Rotate the Select control until 'Sleep timer' is highlighted on the
display then press the Select control.
4. Rotate the Select control until the required sleep time setting is
selected between 15 and 120 minutes or to Off. Press the Select
control to confirm the setting.
5. The display will show 'Sleep timer' set. Your radio will switch off after
the preset time has elapsed.
6. To cancel the sleep time before the preset time has elapsed and to
turn off the radio, use the Select control (or the remote control) to
turn the radio off manually. To cancel the sleep timer and leave the
radio playing, go back into the sleep timer settings (steps 1 to
4 above) and select the Off option in step 4.
During the last two minutes of the sleep timer period, the radio will
gradually reduce the volume before switching off.
51
20070929_WFR-20_381R101-A_GB.p65
2007/10/1, ¤U¤È 05:14
GB
48