Zyxel PLA450 Serie Guía De Inicio Rápida página 5

3 Select Internet Protocol (TCP/IP) (A). Then click Properties (B).
Make a note of your original settings in (C) in the following screen if you will
return the computer to its original hardware connections after configuring
the PLA450.
4 Type 192.168.1.x as the IP address, where x is a number between 3 and 254. Avoid IP
addresses taken by other devices on your network, such as 192.168.1.2, which is the
PLA450's default IP address. Type 255.255.255.0 as the Subnet mask. Click OK.
2.2 Log Into the Web Configurator
The PLA450's web configurator lets you enter and change settings.
ENGLISH
5
A
B
C