Zyxel PLA450 Serie Guía De Inicio Rápida página 8

3 The WPS LED (
indicating your devices are connected.
4 To add another WPS enabled device to your wireless network, press the WPS buttons
on your PLA450 and your next WPS-enabled device.
Congratulations! When you have finished setting up your wireless network, go to Section
4.1 to set up your powerline network.
3.2 Manually Set up a Wireless Network
If your wireless devices are not WPS-enabled, use your computer to manually set up your
wireless network.
3.2.1 Configure Your PLA450 With the Web Configurator
1 Click Network > Wireless LAN in the web configurator's navigation panel.
2 The following screen appears.
• Name: Enter a descriptive name (up to 32 printable English keyboard characters) for your
wireless network.
• Security Mode: Select WPA-PSK.
ENGLISH
) on the PLA450 blinks for a few seconds, then shines steadily,
8