Installing Your Refrigerator; Important - Amana XRSS287BB El Manual Del Propietario

Installing Your Refrigerator

Steps to Follow...
A qualified engineer must connect refrigerator in accordance with these installation instructions.
Service to or replacement of power cord must be performed by a qualified servicer.
Installation Requirements
60 cm deep models.
How to Remove Wooden Base
To avoid personal injury or property damage, two people must remove wooden base.
1. Tape doors shut to prevent doors from opening unexpectedly.
2. Slide appliance cart under side of refrigerator.
3. Wrap refrigerator with blanket or pad. Thread strap around refrigerator. Put foam shipping pads, located in shipping
carton, under strap. Tighten strap securely.
4. Lower appliance cart to floor with appliance cart handles on bottom.
5. Remove top two bolts from skid.
6. Return refrigerator and appliance cart to an upright position. Remove strap.
7. Slide appliance cart under opposite side of refrigerator.
8. Repeat steps 3–5.
9. Remove wooden base.
10. Return refrigerator and appliance cart to an upright position and remove appliance cart.

IMPORTANT:

How to Remove and Replace Doors and Hinges
!
CAUTION
4