How To Connect The Water Supply; How To Level Your Refrigerator - Amana XRSS287BB El Manual Del Propietario

Installing Your Refrigerator
How to Install the Handles
Stainless Steel Handles continued
5
Insert screw plug into predrilled
hole.
6
Repeat steps 2 through 5 to install
freezer handle.

How to Connect the Water Supply

How to Level Your Refrigerator

DO NOT
Materials Needed
3
8
1
Remove Toe Grille and
Bottom Hinge Covers
2
Turn both front adjustment
screws (A) clockwise to raise
and counterclockwise to
lower.
What if my doors are not aligned?
• Locate the higher door, and turn front adjustment screw
counterclockwise. Continue until doors are level.
• If bottom of adjustment range is reached, and doors are
not level–raise opposite door by turning front
adjustment screw clockwise.
• Replace toe grille
continued
To remove after initial install...
IMPORTANT: To avoid damage to unit, use
a flat blade screwdriver edge wrapped in
masking tape to remove screw plugs.
!
CAUTION
3
Turn both rear adjustment
screws (B) clockwise to raise
and counterclockwise to
lower.
4
Check with level to verify 6 mm tilt to the
back for proper door closure.
$
What if my unit rocks?
•
•
6
Turn rear adjustment screw clockwise to raise
rocking corner.
Replace toe grille.
%