Shelves
Stor-Mor
System
®
Baskets slide out for easy access of items in back.
Shelves can be removed to meet individual storage
needs.
To remove and install Stor-Mor
•
To remove, snap right side of
shelf from cabinet railing and
remove from wall mounting
clips.
•
To install, reverse above procedure.
NOTE: Back of shelf must be flush with back of
cabinet to secure firmly in cabinet railing. Improper
alignment will cause shelf to slide.
To remove and install baskets:
•
To remove, pull basket forward
to full extension. Lift front handle
to release basket from rails and
remove.
•
To install, reverse above procedure.
Door Storage
Door Buckets
•
Refer to Fresh Food section for instructions.
®
shelf:
Freezer Features
Fixed Freezer Shelf
To remove and install shelves:
•
Remove shelf from wall
mounting clips and pull out
of left side mounting holes.
•
To install, reverse above procedure.
Hanging Wire Shelf (some models)
Hanging wire shelf provides extra storage for ice cube
trays, boxed frozen foods, ice packs, etc.
To remove shelf:
•
Pinch rung hook of hanging
wire shelf inward to release
hanging wire shelf from right
side of Stor-Mor
will swing downward.
•
Press rung hook of hanging
wire shelf outward to remove
shelf from freezer section.
To install shelf:
•
Perform above steps in reverse order.
Tilt-Out Door Buckets
(some models)
•
Refer to Fresh Food section for instructions.
13
®
shelf. Shelf