Dispenser Features
Hidden Control Features
Sabbath Mode
This mode is intended to deactivate power to the LED and dispenser lights, while allowing the
controls to remain operational. No visual or audio alarms will be available while in this mode.
To activate Sabbath Mode:
•
Press and hold both the
simultaneously for 3 seconds. After 3 seconds, the
LED and dispenser lights will turn off. Dispenser
light will not activate during dispensing while in
this mode.
Auto Display
The AUTO Display controls the illumination of the LED display based on the light readings received from the SENSOR .
In AUTO mode, if the SENSOR indicates low light levels, the display will be dimmer than if displaying during well-lit
periods. In ON mode, the display will have only one illumination setting and will not change due to light levels.
To set the power level of the display:
•
Press and hold both the
the display by using
•
Use the refrigerator
•
Activate the chosen setting by pressing the
Temperature Conversion Mode
This mode is available to change the Temperature
Display between Fahrenheit and Celsius.
Hidden Lockout for Upper Keypad
The purpose of this mode is to prevent tampering with the upper set of dispenser controls.
This includes the Display On/Off , Max Freeze, Max Cool, Vacation Mode, and Temperature Set
functions.
To activate Hidden Dispenser Lockout:
•
Press the
and
3 seconds.
ON/OFF Function
The ON/OFF function turns off cooling to the
fresh food and freezer sections.
To turn the unit off:
•
Press the freezer
beyond the maximum allowable freezer temperature. At
this point, the LED displays:
•
Press the
button to confirm the selection.
(Electronic Control)
and
buttons
NOTE: In the event that power is interrupted while the Sabbath Mode is active, the control will remain in
Sabbath Mode when power returns.
button and the freezer
O
AL
for on,
for auto.
button to scroll through the display states.
buttons simultaneously for
button until the readout registers
-- --
-- --
-- --
-- --
-- --
To deactivate Sabbath Mode:
•
Press and hold both
seconds. After 3 seconds, the LED and dispenser lights will
activate.
button for 3 seconds. The current active state will show in
button.
To change temperature reading:
•
Press the
and freezer
for 3 seconds. Pressing the same button combination will allow
the user to toggle between the two selections .
To deactivate Hidden Dispenser Lockout:
•
Press the
for 3 seconds.
!
To avoid electrical shock which can cause severe personal
injury or death, do not perform maintenance or service on
refrigerator unless unit is unplugged.
To reactivate the unit:
•
Press the freezer
•
Press the
18
+
and
buttons simultaneously for 3
buttons simultaneously
+
and
buttons simultaneously
WARNING
button.
button to confirm the selection.
° F
° C