Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Charge
Charging with the self-cleaning recharger
Thoroughly wipe off any drops of water on or around the
recharger so that it is dry before charging it.
2
1
1
Insert the appliance plug.
1
2
2
Plug in the adaptor.
3
Remove the protective cap and then attach
3
the shaver.
•
Turn the shaver off before attaching.
•
Check that the outer foil is not deformed or damaged when
you are attaching the shaver.
•
The indicators on the LCD panel glow and charging starts.
•
If the indicators on the LCD panel do not glow, wait for a
short while until it glows.
•
Charging is completed when the indicators on the LCD panel
blink.
(Max. 1 hour later)
•
You can keep the shaver attached to the recharger, or
connected to the adaptor, when not using it to maintain full
battery capacity. You cannot overcharge the shaver.
6
GB
3
Charging without the recharger
You can also charge without the recharger.
1. Insert the appliance plug into the shaver.
. Plug in the adaptor into a household
outlet.
LCD panel when charging
The LCD panel shows the remaining battery capacity from 0%
to 100%, in 10% increments.
After charging is
While charging
completed
The indicators
The indicators
blink once every
glow.
second.
2
1
10 minutes after
charging is
completed
The indicators
blink once every
seconds.
Publicidad
Tabla de contenido
