Kohler K-8855 Guia De Instalacion página 7

Bonnet
Inner Geared
Ring
Plug
O-Ring
5. Adjust the Maximum Water Temperature
Carefully pry off the plug button using a small flat-bladed
screwdriver.
Loosen the setscrew and remove the handle and bonnet.
Note the position of the outer locking ring relative to the inner
geared-ring.
NOTE: Pry the locking ring up equally at either side in order to
remove it from the valve.
Using a small flat-bladed screwdriver, pry up the locking ring.
Rotate the locking ring clockwise to increase temperature, or
counterclockwise to decrease temperature.
Align the geared teeth and slide the locking ring into position.
Reinstall the bonnet and handle to the faucet body.
Test the setting and make any adjustments as needed.
After all adjustments have been made, use the hex wrench to
tighten the setscrew.
Press the plug button into place.
Kohler Co.
Handle
Inner Geared
Ring
Setscrew
Plug Button
Locking
Ring
Locking
Ring
7 1044533-2-A