Metra 108-TO1 Instrucciones De Instalación página 4

With column shifter
1. Remove (2) plastic Phillips screws from
each side of the trim panel below the
cup holder, then unclip and remove the
panel. (Figure A)
2. Pull the cup-holder out, then depress
the clip from each side to remove the
cup-holder from the dash. (Figure B)
3. Remove (4) Phillips screws securing the
cup-holder assembly to the dash, then
unclip and remove the assembly. (Figure C)
Continued on the next page
4
DASH DISASSEMBLY
(Figure A) (Figure B) (Figure C)
|
1.800.221.0932 MetraOnline.com