Kenmore 116.31195 Manual De Uso página 16

CAUTION
Be sure to hold the dust cup over a
proper trash container prior to releaslng
the door of the dust cup.
4. Press dust cup lid release. The dust
cup will open and the debris will fall out.
5. Remove any clogs that might be
located in the pre-filter. (See CLEANING
PRE-FILTER, p. 17)
6. Shake the dust cup to release any
debris that might hang in the pre-filter
TO REPLACE DUST CUP
1. After the dust cup is empty of debris,
firmly close the door. Make sure you hear
a "click" sound to indicate that the door
is fully latched.
__ Door
Latch
D
'2. Place dust cup back into vacuum
cleaner by inserting the bottom first and
tilting back.
3. Push forward and lower dust cup
handle to lock dust cup in place.
- 16 -