EDGE CLEANING
This model
is equipped
with an edge
cleaning
feature
for cleaning
carpet
edges near baseboards
and stationary
furniture.
AUTOMATIC
ADJUSTING
NOZZLE
Deep Pile Carpet
Shallow Pile Carpet
The nozzle
of your vacuum
cleaner
automatically
adjusts
to any carpet
pile
height.
Feature allows nozzle to float evenly over
carpet pile surfaces.
No manual
adjustments
required.
THERMAL
PROTECTOR
This vacuum cleaner has o thermal
protector which automatically
trips to
protect the vacuum cleaner from
overheating.
If a clog prevents
the normal
flow
of air
to the motor, the thermal
protector
turns
the motor off automatically.
This allows
the motor to cool in order to prevent
possible damage
to the vacuum cleaner.
TO CORRECT
PROBLEM:
Turn the vacuum
cleaner
off and unplug
the power cord
from
the outlet
to allow
the vacuum
cleaner
to cool and the
thermal
protector
to reset.
Check for and remove
clogs, if necessary
(See REMOVING
CLOGS p. 22-23).
Also
check
and replace
any clogged
filters
and empty
dust cup, if necessary.
Wait
approximately
fifty
(50) minutes
and
then plug the vacuum
cleaner
in and turn
back on to see if the motor
protector
has
reset.
- 14 -