8. Stretch
the hose to maximum
length
and then allow
the hose to return
to its
storage
length,
If the dust cup and filter
areas
and the
hose areas
are free of clogs,
check
the
nozzle
air path.
CLOGS IN NOZZLE AIR PATH
1. Turn off and unplug
the vacuum
cleaner.
2.
Remove nozzle
hose from body
by (1)
pressing
in locking
tab and (2) sliding
up
and out of retaining
slot.
3.
Inspect
inlet of nozzle
hose and clear
any obstructions.
4.
Replace
nozzle
hose by sliding
down
on retaining
bracket
until you hear a click.
5.
Return the vacuum
cleaner
to the
upright
position
before
plugging
into an
electrical
outlet.
-23-