Kenmore 116.31195 Manual De Uso página 19

REPLACING HEPA MEDIA EXHAUST FILTER
WARNING
Always unplug power cord from
electrical outlet before performing
any service on vacuum cleaner.
The HEPA media exhaust filter removes
dirt from exhaust air. Check filter after
emptying dust cup. Replace when dirty.
Filter cannot be cleaned and should be
replaced at least once each year.
NOTE: See REPLACEMENTPARTSfor part
number detail (page 5).
1. Turn off and unplug the vacuum
cleaner.
2. Press latch to remove exhaust filter
cover.
3. Grasp the exhaust filter and pull out
to remove.
Filter
TO REPLACE FILTER
1.Place the new filter into the vacuum
cleaner with the foam seal down.
2. Be sure air flow arrow on filter is
pointing upward.
3. Reinstall the exhaust filter cover by
inserting the tab into the slot in the
vacuum cleaner. Press firmly to snap
exhaust filter cover into place.
_Slot
- 19 -