Kenmore 116.31195 Manual De Uso página 17

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CLEANING
PRE-FILTER
1. Make
sure the dust cup is empty.
2.
Rotate
dust cup lid assembly
to unlock
(as indicated
on the lid), and lift off.
LOCKED
(For Use)
UNLOCKED
(For Cleaning)
3. Grasp
pre-fitter
and rotate
counter-
clockwise
to remove.
UNLOCKED
(For cleaning)
4. Clean
pre-filter
by gently
tapping
over
a trash container.
5. Rinse with water only as needed, do
not use any detergent or soap.
6. Allow pre-filter
to dry for 24 hours
before placing back into vacuum cleaner.
To Reinstall:
1. Align
the slot on the pre-filter
with the
alignment
tab inside dust cup.
- Tabs
Slots
2. Rotate pre-filter clockwise to lock in
place.
LOCKED
(For Use)
3. Reinstall dust cup lid and turn to
locked position (as indicated on the lid).
LOCKED
(For Use)
UNLOCKED
(For Cleaning)
- 17-

Publicidad

Tabla de contenido
loading

Tabla de contenido