Página 1
Instructions Model Number B8786 f Instructions Numéro de modèle : B8786 S Instrucciones Número de modelo: B8786 • Please read these instructions before use of this product. Keep this instruction sheet, as it contains important information. • Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included).
Página 2
eWARNING fAVERTISSEMENT SADVERTENCIA e To prevent serious injury or death: • Never use on any elevated surface, since child’s movement may cause this seat to slide or tip over. • Never use on a soft surface (bed, sofa, cushion), since seat can tip over and cause suffocation in soft surfaces.
Página 3
e Parts f Pièces S Piezas IMPORTANT! Please remove all parts from the package and identify them before assembly. Some parts may be packed in the pad. IMPORTANT ! Retirer tous les éléments de l’emballage et s’assurer d’avoir toutes les pièces avant de commencer l’assemblage.
Página 4
Front Base edges. DO NOT use if any parts are missing or broken. 4mm x 20mm Screw – 2 Contact Fisher-Price® for replacement parts and Base avant instructions if needed. Never substitute parts. Vis 4mm x 20mm – 2 Base delantera Tornillo 4mm x 20mm –...
Página 5
e Assembly f Assemblage S Montaje Back Base Base arrière PRESS 4mm x 30mm Screw – 2 Base trasera APPUYER Front Base PRESIONAR Vis 4mm x 30mm – 2 Base avant Tornillo 4mm x 30mm – 2 Base delantera PRESS APPUYER PRESIONAR Handle Tubes...
Página 6
e Assembly f Assemblage S Montaje Upper Flap Seat Back Tube Repli supérieur Tube du dossier Solapa superior Tubo del respaldo Lower Pocket Repli inférieur Front Base Compartimento inferior Base avant Base delantera •Fit the pad lower pocket around the front base and •Fit the upper flap on the pad around the seat back tube.
Página 7
e Assembly f Assemblage S Montaje Fastener Tabs Attaches Lengüetas de sujetador Side Flap Strap Repli latéral Courroie Solapa lateral Cinta Tabs Pattes •Turn the assembly face down. Lengüetas •Fasten both pad side flaps to the strap on the back of the pad.
Página 8
e Assembly f Assemblage S Montaje •Attach the bunny to any of the fastener tabs on the sides of the pad or the blanket, as shown. Bunny Assembly is now complete. Lapin Conejito •Fixer le lapin à l’une des attaches situées sur les côtés du coussin ou de la couverture, comme illustré.
Página 9
e Battery Installation f Installation des piles S Colocación de las pilas Hint: We recommend using alkaline batteries for longer battery life. 1.5V x 3 “C” (LR14) Remarque : Il est recommandé d’utiliser des piles alcalines, car elles durent plus longtemps. Shown Actual Size Consejo: Se recomienda usar pilas alcalinas para una mayor duración.
Página 10
e Battery Safety Information f Conseils de sécurité concernant les piles S Información de seguridad sobre las pilas Batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: •Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
• No usar con niños que pueden sentarse por sí solos. IMPORTANT! Before each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts.
Página 12
e Setup and Use f Installation et utilisation S Preparación y uso Securing your Infant Anchored End Anchored End Installation de l’enfant Extrémité fixe Extrémité fixe Asegurar al niño Extremo fijo Extremo fijo Restraint Pad Ceinture de retenue Almohadilla de sujeción Free End Free End Extrémité...
e Soothing Unit f Unité de vibrations S Unidad relajante Power Switch Interrupteur Interruptor de encendido •Make sure your child is properly secured in the seat. •Slide the power switch to for music. •Slide the power switch to for vibrations. •Slide the power switch to music and vibrations.
Página 14
e Storage f Rangement e Care f Entretien S Almacenamiento S Mantenimiento •The pad, toy and blanket are machine washable. Wash Button them separately in cold water on the gentle cycle. Bouton Do not use bleach. Tumble dry separately on low heat and remove promptly.
e Care f Entretien S Mantenimiento To remove the pad: •Place the seat face down on a flat surface. •Unfasten the side buckles. Pour retirer le coussin : •Turn the seat upright. •Mettre le siège à l’envers sur une surface plane •First remove the bottom pocket of the pad .