Technical Data; Disposal - Masterpro BGMP-9127 Manual De Instrucciones

EN
WORKING WITH THE DEVICE
If the device does not work properly, first check whether you are able to rectify the problem
yourself.
Do not attempt to repair a defective electrical device yourself!
Problem Possible cause / solution / tips
The device does not work. •
Is the device in standby mode? Press the POWER button.
Nothing is shown on the
•
Is the mains plug not inserted in the plug socket correctly?
display.
Correct the fit of the mains plug.
•
Is the plug socket defective? Try another plug socket.
•
Check the fuse of the mains connection.
•
"Err" error message on the The measuring range of the scale has been exceeded.
display.
Only weigh ingredients up to no more than 5 kg.
•
"E2" error message on the The mixing bowl is not inserted correctly. Place the mixing bowl
display.
into the mixing bowl mount and press it down until you hear it
engage.
•
The mixing bowl is open or the mixing bowl lid or steaming
attachment is not locked on properly. Correct the fit of the mixing
bowl lid / steaming attachment.
The device switches off and The motor has overheated.
cannot be switched on. 1. Switch off the device using the On / Off switch.
2. Remove the mixing bowl and open it.
3. Reduce the quantity and / or add a little liquid.
4. Wait for around 5 minutes (cool-down time).
5. Close the mixing bowl and reinsert it in the motor unit.
6. Switch on the device using the On / Off switch. If the device
still cannot be switched on after the cool-down time, contact the
customer service department.
During use, an unpleasant •
Is the device being used for the first time? A smell often
smell is detected.
develops when new devices are first used. The smell should
disappear after you have used the device several times.
•
If the motor is placed under too much strain, as well as the
device being switched off by the electronic protective switch, a
smell may be produced due to the heated motor. However, this is
completely harmless. After the cool-down time, the device is in full
working order again.
16

TECHNICAL DATA

Model: BGMP-9127
Voltage supply: 220-240V~50/60 Hz
Power: Max. 1450 W (Heating: 850 W / Motor: 600 W)
Protection class: I
Mixing bowl: Stainless steel, with integrated heating and temperature
sensor, maximum fill level 1.5 litres.
Timer: Up to 60 minutes
Speed of the blade: 2 levels (approx. 2200 – 5700 rpm)
Temperature setting: 40°C, 60°C, 80°C, 100°C and 120°C
Scale: Measuring range 0 – 5000 g in 1 g increments
Short-term operation (KB): 2 minutes

DISPOSAL

Dispose of the packaging material in an environmentally friendly manner and take it to a
recycling centre.
Dispose of the device in an environmentally friendly manner at a recycling centre for used
electrical and electronic devices. More information is available from your local authorities.
17
EN