Publicidad
f Réglage – option vibrations
S Preparación para uso con vibraciones
7
5
1
4
e Set-Up For Vibrations Use
6
1
14
e"Wah, Wah, Wah..."
f«Ouin, ouin, ouin...»
S"Wah, Wah, Wah..."
2
3
e
IMPORTANT! Test reception of this monitor before first time use
and whenever you change location of transmitter (see page 10).
1. Set transmitter channel switch to same channel as receiver.
2. Place transmitter in same room with child. Point microphone
directly toward crib or play area.
3. Unwrap and fully extend power cord for best transmission.
Plug transmitter power cord into wall outlet.
4. Slide transmitter power switch to turn power on.
Power indicator lights.
5. Clip receiver to your clothing, where you will feel vibrations.
Or, place the receiver in your pocket.
6. Rotate receiver power/volume dial to turn power on. Power
indicator lights. Rotate power/volume dial to adjust volume
(if you want to hear sounds).
7. Press the vibrations button. Vibrations ready indicator lights.
Hint: Under permitting conditions, the receiver receives sounds (and
you will feel vibrations) up to 1,000 feet (300 meters) away from baby.
Publicidad
