Replacing The Pushbutton Switches - NAMCO MARIO KART Manual Del Operador

7-4

Replacing the Pushbutton Switches

1. Remove 6off security screw (M5x12) to release the Play Panel Vac-Form.
Security screw
2. Raise the Play Panel Vac-Form only sufficient to disconnect the connector.
3. Remove the Play Panel Vac-Form
(M5x12)
Security screw
(M5x12)
Connector
Page 66
Security screw
(M5x12)
Play Panel Vac-Form
Play Panel Vac-Form