Replacing The Monitor - NAMCO 500 GP Dlxe Manual Del Operador

8-1

Replacing the Monitor

At leastfive people are required to remove the monitor.
1. Seperate the Coin Tower Cabinet from the Monitor Cabinet.
(see section 5-2 page 36)
2. Remove 4off security screws (M5x25) and remove the front cover.
3. Disconnect te two connectors and then remove 2off hex head screws
(M10x130), spring washers and square flat washers.
Security screw
(M5x25)
Front cover
Spring washer (M10)
Hex head screw (M10x130)
The monitor is heavy (Approx 100kg).
Monitor Assy
Connectors
Square flat washer
Page 54
Monitor base