Replacing The Monitor - NAMCO PANIC PARK Manual Del Operador

8-8 Replacing the Monitor

The monitor weighs approx 40kg. Ensure that at least two people are used to
remove the monitor, and there is sufficient space to work safely.
1. Remove the control panel cover.
2. Loosen the 2off lower security screws (M5x12), and remove the 4off
upper security screws (M5x12), and remove the monitor maintenance
panel from the rear of the cabinet.
3. Disconnect the monitor connectors.
4. Remove the 4off hex head screws (M6x40), flat and spring washers
retaining the monitor to the monitor shelf.
5. Remove the 4off security screw (M5x12) and remove the monitor vac-
form.
(see section 8-2 page 54)
Page 60