Installation - Tripp-Lite BP36V142U Manual Del Propietário

200301100 93-2115 Rackmount Battery Pack Owner's Manual.qxd

Installation

Color Selection
The BP48242U can be configured to match black or grey equipment. To match black equipment, switch the
grey front panel on the unit for the black front panel included.
Single Unit Installation
Connect the shelves to the shelf extensions (A) using the
1
included hardware (B). Leave the screws slightly
loose so that the shelves can be adjusted in the next step.
2
Adjust each shelf to fit your rack, then mount them
in the lowest available space of your rack with the
hardware provided (C). Note that the support ledges
should face inward. Tighten the screws that connect
the shelf segments (B).
Attach mounting ears (D) to the front mounting holes
3
of your equipment (E) using the screws provided
(F). The ears should face forward.
Using an assistant if necessary, lift your equipment and
4
slide it onto the mounting shelves. Attach your
equipment to the rack by passing user-supplied hardware
(G) through its mounting ears and into the rack rails.
(BP48V242U Only)
3
1/30/2003
B
A
1
C
2
D
3
G
4
1:39 PM Page 3
B