Tripp-Lite BP36V142U Manual Del Propietário página 4

200301100 93-2115 Rackmount Battery Pack Owner's Manual.qxd
Installation
2-Post (Telecom) Installation
1 Mount the shelved sections (A) of your kit on the back
side of your rack. Mount them in the lowest available
space of your rack with the hardware provided (B).
Note that the support ledges should face inward.
2
Attach mounting ears (C) to the front mounting holes
of your equipment (D) using the screws provided
(E). The ears should face backward.
Using an assistant if necessary, lift your equipment
3
and slide it onto the mounting shelves. Attach your
equipment to the rack by passing user-supplied hardware
(F) through its mounting ears and into the rack rails.
Tower Mounting
Order optional adjustable tower stands, sold separately
(Tripp Lite model: 3-9USTAND) to tower mount UPS
system and battery pack.
Battery Pack Connection
BP48V242U Battery Packs have a blue 175-amppo-
1
larized plug (A) on an output cord permanently connected
to the rear panel. Simply plug the output cord directly
into the external battery connector of your UPS. (See
your UPS manual for external battery connector
description and location.) Note that only one of these
Battery Packs is generally connected to a UPS at one
time. For longer runtime, you may connect two to a
single UPS using a 48V Y-Adapter Cable sold separately
by Tripp Lite, or use one or more BP48V60RT3U
Tripp Lite Battery Packs with daisy-chain capability.
BP48V212U, BP36V142U or BP72V122U Battery
2
Packs feature dual input/output receptacles on their
rear panels (B) . To connect to a UPS, insert one end
of the detachable power cable (C) into either plug on
the rear of the Battery Pack and the cable's other end
into the external battery connector of your UPS. (See
your UPS manual for external battery connector
description and location.) To connect multiple
Battery Packs to a single UPS for greatly increased
runtime, connect the output of the first Battery Pack
to the UPS's external battery connector, then "daisy
chain" the others: connect an input/output plug on
the second Battery Pack to an input/output plug on
the first, a plug on third to a plug on the second and
so on. Note that multiple Battery Pack arrays will
provide longer runtimes, but will also require longer
recharge times.
B
1
C
2
F
3
1
BP48V242U
2
BP48V212U, BP36V142U OR BP72V122U
4
1/30/2003 1:39 PM Page 4
A
E
A
B
C