1.
Open the coin door and slide the test switch ON.
2.
Pressing the Enter Switch will step through the tests.
3.
Activate the test selected by pressing the Service Switch.
4.
After testing is completed, slide the test switch to the OFF position to return to
normal game mode.
The Test Switch must always be in the OFF position for normal game mode.
Test Item
1. Indication Test
2. Input Test
3. Character Unit Test
4. Sound Test
If there is a problem with a character, the 7-segment LED corresponding to the character
indicates
.
Service Switch
• The 7-segment LED indicates 0 to 9 repeatedly. (The third digit is
always 1 .)
The timer lamp, the damage lamp, the rank lamp and the game over lamp
will light up in turn.
• When an input signal is on, the 7-segment LED corresponding to the
signal will light up as shown below.
• Every time a coin signal is received, the coin counter (shown below)
counts one.
• Checks the movement of the characters.
The characters 1 - 5 move back and forth in turn in order of character
number.
• All the sounds are played in turn. Pressing the service switch interrupts
the current sound and plays the next sound.
Test Switch
Sensors for each character
Hit Detection Sensor
Front Limit Sensor
Rear Limit Sensor
Page 38
Description
Character 5
Character 4
Character 3
Character 2
Character 1
Coin Count