NAMCO GATOR PANIC Manual Del Operador página 47

1. Remove the Display Box assy.
2. Loosen the 2off Pozi head screws (M5x8) and remove the Slope.
3. Disconnect the Alligator Assy connector and pull the Alligator Assy up to remove
it.
4. When refitting the Alligator Assy ensure that the pipe of the Alligator Assy fits
between the two collars of the Drive Assy.
5. When refitting the Alligator Assy ensure that Assy is in the backmost position and
the distance between the upper mouth and the field is 47-55mm.
(see 6-6 page 48 for adjustment.)
6. Reconnect the connector and refit the Display Box Assy.
Alligator Assy Pipe
Drive Assy
Joint Collars
(see 6-4 page 46)
Top View of Slope
Connector
Page 47
Pozi head screw
(M5x8)
Slope
Alligator Assy